Click image to view full size image
1x50W 350mA-1050mA Multi-output Current 1-10V Push Dimmable LED driver for down light and LED panel light, 123x79x23.5mm
Description:
1, Multi output current 350mA to 1050mA selectable via DIP switch.
2, Primary and secondary dimming with PUSH button.
3, Secondary dimming with 1-10V dimmer.
4, Dimming mode easily switched by Jumper.
5, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
6, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
7, Maximum length of the cable, from push button to last driver is 20m
8, Press-in terminals in primary and secondary side, easy assembly
9, Protection: Short circuit / Over voltage / Over temperature
10, 5 years guaranty
Specifications
|
INPUT
| Input voltage | 220-240Vac | ||
| Input frequency | 50-60Hz | |||
| Input current | 0.26A max | |||
| Power factor | ≥0.90 | |||
| Efficiency(Note1) | ≥87% | |||
| Leakage current | 0.5mA/240Vac | |||
|
OUTPUT
| Output current/voltage and load | 350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC, 50W max | ||
| Output load range | 1x50W max | |||
| Current accuracy | ±5% | |||
| Dimming mode | 1-10V, PUSH | |||
|
ENVIRONMENT
| Working temp.(Ta) | -20~50 | ||
| Surface temp.(Tc) | 85max | |||
| Working humidity | 20~90%RH non-condensing | |||
| Storage temp. | -40~80 | |||
| Life time | ≥50000hours | |||
|
PROTECTION
| Isolation class | Class |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |