Click image to view full size image
400W 220-240Vac Dry Contact ON-OFF Microwave Motion Sensor MC008S 1 With CE and R&TTE approval
Description
1. Automatic switching based on motion and ambient light level.
2. Dry Contact detector works in normally close and normally open mode
3. With high voltage input 220-240v AC input.
4. 5.8GHz high frequency microwave(C-Band license-free operation)
5. 4-pole press-in terminal (L, N, N,L′),easy assembly.
6. Detection area, time delay and daylight threshold can be precisely set via DIP switch.
7. MC008S 1 supplies dry contacts in normally closed mode and normally open mode .Dry contact means open or close contact without any current or voltage .It is perfect for the application where requires isolation between motion signal and power supply.
Function:
ON-OFF function
Specifications:
| Operating voltage | 220-240Vac, 50Hz |
| HF system | 5.8GHz±75MHz, ISM wave band |
| Power consumption | ≤0.5W(standby), <1W(operation) |
| Transmitting power | <0.5mW |
| Detection zone Max.(D x H) | 16m x 6m |
| Motion detection | 0.5~3m/s |
| Detection angle | 150°(wall installation) 360°(ceiling installation) |
| IP rating | IP20 |
| Operation temperature | -20~60 |
| Hold time | 10s/30s/90s/3min/20min/30min |
| Detection sensitivity | 25/50/75/100 |
| Daylight sensor | 5lux / 10lux / 30lux / 50lux / Disable |
| Life time | 50,000 hours |
| Guaranty | 5 years |
Dry Contact Detector / Microwave Motion Sensors Easy Assembly , Guaranty 5 Years
